Precor CW34870-101 Скачать руководство пользователя страница 29

Страница: 29 / 45

Getting Started

Note:

Assemble the weight stack shroud and bottle holder/accessory

tray after the equipment is positioned in the facility.

Assembly takes about 15 minutes to complete. If this is the first time
you have assembled this type of equipment, allow more time.

Open the Box

Open the box and remove the packing materials.

Before you begin installing the weight stack shroud assembly, verify
that you have received the following parts:

For Weight Stack Shroud Assembly

One front shroud assembly (CW34198)

One pulley cover (CW34012)

One lower left corner cover (CW34343)

One lower right corner cover (CW34343)

One pulley plug cover (CW34013)

One lower middle cover (CW33945)

One lower back cover (CW33944)

One upper back cover (CW34376)

One top cover (CW33947)

One adjustable foot (CW39916-102)

One foot cover with 75-degree upper opening (front, CW34061-103;
back, CW34061-104)

Two #8 x 1

¹⁄₄

” Phillips-head self-tapping screws

Ten

¹⁄₄

”- 20 buttonhead screws

Two #8 x

⁵₈

" Phillips-head self-tapping screws

For Attaching Bottle Holder/Accessory Tray

One bottle holder/accessory tray (CW34368)

One U-shaped bottle holder bracket (CW34364)

Two #8 - 32 machine screws

Two custom bolts

Two lock washers

Two flat washers

Two

³₈

” - 16 low head bolts

Required Tools

One

⁵₃₂

” hex key

One

³₁₆

” hex key

One

¹₄

” hex key

One

⁹⁄₁₆

” socket wrench

One

³₄

” open-end or box-end wrench

One 1”open-end or box-end wrench

One #2

Phillips screwdriver

Caution: Do not use power tools to tighten screws attaching the weight
stack shroud components. Using power tools may void the Precor
warranty.

Lat Pulldown Assembly and Delivery Guide: Getting Started

Содержание CW34870-101














































Результаты поиска

Содержание CW34870-101

Отзывы:

Похожие инструкции для CW34870-101

Бренды по названию

Популярные бренды

Precor CW34870-101, Руководство пользователя

Результаты поиска

Содержание CW34870-101

Отзывы:

Похожие инструкции для CW34870-101

Бренды по названию

Популярные бренды