Precor CW-507, Инструкция по сборке

Страница: 14 / 48

CW-507 Assembly Guide
page 14
8. Slide the Foot Rest through the Foot Support and
secure it using
one 1¼-inch buttonhead screw (J)
one ½-inch split washer (F)
one ½-inch washer (B)
one spacer (K)
Wrench tighten.
Note:
For ease of assembly, place a split washer,
a flat washer, and a spacer onto each screw before
inserting the screw.
9. Insert the Weight Plate Holders into the Upright
Frame. Turn the Weight Plate Holders so the
mounting holes align with the holes in the Upright
Frame.
10. Secure the Weight Plate Holders using
two 1¼-inch buttonhead screws (J)
two ½-inch split washers (F)
two ½-inch washers (B)
two spacers (K)
Wrench tighten.
Note:
For ease of assembly, place a split washer,
a flat washer, and a spacer onto each screw before
inserting the screw.
11. Slide a Bumper (L) onto each end of the Weight
Plate Holders, and press firmly against the Upright
Frame.
Note:
Make sure the small side of the bumper
faces the Upright Frame.
2 - 1¼” buttonhead screws
2 - split washers
2 - washers
2 - spacers
1 - 1¼” buttonhead screw
1 - split washer
1 - washer
1 - spacer