Precor CW-411, Инструкция по сборке

Страница: 25 / 48

General Safety and Maintenance Manual: Before You Begin 7
Before You Begin
Precor recommends implementing a thorough maintenance program
that incorporates regular safety inspections by qualified maintenance
technicians as outlined in this manual.
This manual explains how to maintain the Precor Icarian line of
commercial strength equipment. It provides information about items
that need to be inspected and maintained on a daily, weekly, monthly,
and annual basis. You should perform those tasks that are appropriate
for the equipment you are maintaining, and skip those tasks that do
not apply. To help you, a checklist is located at the back of this manual
that you can follow during your maintenance checks to ensure that
nothing appropriate is missed and that your inspection process is
documented.
This manual covers the general maintenance procedures that you can
perform in the fitness facility. However, if the equipment requires
service beyond the maintenance procedures covered in this manual,
refer to
Obtaining Service .
Important: Always purchase replacement parts and hardware from
Precor. These parts are tested and manufactured specifically for the
Precor Icarian line of commercial strength equipment. If you use parts
not approved by the manufacturer, you could void the Precor Limited
Warranty. Use of parts not approved by Precor may cause injury.
Precor recommends that maintenance technicians thoroughly read
and understand the safety guidelines and maintenance procedures
covered in this manual.
Note: If the equipment requires assembly, a separate assembly guide
is provided. For information on how to use a piece of equipment, refer
to the instructional label found on the equipment.
Recommended Tools
We recommend that you put together a toolbox with the following
tools. This list covers the tools you may need when you inspect and
maintain the equipment.
• Complete combination box wrench set from
¹⁵⁄₁₆
to
¹₂
-inch
• Complete socket set from
¹⁵⁄₁₆
to
¹₂
-inch
• Hex nut driver:
¹₄
-inch
• 12-inch adjustable wrench
• Complete hex key set from
³⁄₈
to
⁵⁄₆₄
-inch
• Rubber mallet
• Straight shank punch:
¹₄
-inch