Precor CW-411 Скачать руководство пользователя страница 43

Страница: 43 / 48

General Safety and Maintenance Manual: Annual Maintenance

Annual Maintenance

Perform these tasks on an annual basis, as appropriate for your
equipment:

Weight Stack Annual Maintenance

Once a year, Precor recommends disassembling the weight stack to
clean and inspect it thoroughly.

• Carefully remove the cable and guide rods from the weight stack.

Completely disassemble the weight stack in a well-ventilated area,
away from the exercise floor.

• Inspect weight plates and clean them thoroughly. Cracked or

broken plates should be replaced immediately (refer to

Obtaining

Service

to purchase replacements). Clean each plate individually

and inspect guide bushings.

• Inspect the bushings of the top weight plate and each individual

weight plate and replace a plate if it is excessively worn or broken.

• Clean the selector stem and inspect it for wear and damage.

• Reassemble the weight stack.

• Wipe down the weight stack enclosures (shrouds) with a damp

cloth as needed. Inspect all fasteners to ensure the shroud is
securely mounted.

Important:

Precor recommends that you replace worn and damaged

cables during routine maintenance. It is recommended that all cables
be replaced annually.

Содержание CW-411

















































Результаты поиска

Содержание CW-411

Отзывы:

Похожие инструкции для CW-411

Бренды по названию

Популярные бренды

Precor CW-411, Инструкция по сборке

Результаты поиска

Содержание CW-411

Отзывы:

Похожие инструкции для CW-411

Бренды по названию

Популярные бренды