Precor Crosstrainer 600, Инструкция по сборке

Страница: 11 / 16

Install EFX arms
To install moving arms:
1. Insert the shaft of the moving arm to the center mount (Figure 15) and
align pre-installed set screws to the shaft (Figure 16).
Figure 15
2. Insert one screw next to it and fully tighten all screws, including pre-
installed ones to 100 in-lb (11.29 N-m) of torque.
Figure 16
3. Cut the zip ties holding the link arms together.
4. Place the inner cover between the link pairs and attach the link to the moving
arm using a 9/16-inch socket wrench on the pre-installed bolts and tighten to
3 00 in-lb ( 33.90 N-m) of torque.
Figure 17
5. Attach the outer link covers (shipped in hardware kit) using two Plastite®
screws and tighten them to 20 in-lb (2.25 N-m) of torque.
12