Precor Bicycle-mounted Child Seat C842, Руководство по обслуживанию

Страница: 5 / 87

C842, C842i, C846, C846i Upright and Recumbent Cycle
Page 5
Section Two - Preventive Maintenance
Preventive maintenance measures are either scheduled or unscheduled. Scheduled preventive
maintenance activities are included here so that you are aware of preventive measures
performed on a regular basis.
Regular Preventive Maintenance (Owner)
Cleanliness of the cycle and its operating environment will keep maintenance problems and
service calls to a minimum. Precor recommends that you perform the following preventive
maintenance schedule.
After Each Use
• Turn off and, unplug the power adapter (if equipped) from the bicycle.
• Wipe down the covers, handlebars, seat and pedals with a damp cloth.
Daily Maintenance
Clean the bicycle’s frame, covers, seat and pedals using a water damped cloth. Wipe the surface
of the electronic console with a damp sponge or soft cloth. Dry with a clean towel.
Weekly Maintenance
• Clean underneath the bicycle, following these steps:
1. Turn off the bicycle with the on/off switch, then unplug it from the power adapter (if
equipped).
2. Place the bicycle on its side.
Note:
Place a drop cloth under the bicycle to protect the flooring and to ensure that the cycle handrail is
not scratched or damaged.
3. Vacuum the rug or damp mop the floor.
4. Make sure that the floor is dry before returning the bicycle to an upright position.