9.33, 9.35 240V Treadmill
Page 5
Procedure 2.1 - Accessing the Hardware Validation Program
The treadmill's diagnostic program consists of the following modes:
•
Display Test
•
Keyboard Test
•
Heart Rate Test
•
Machine Test
Procedure
1.
Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2.
Refer to diagram 2.1 below and press keys RESET,5,1,7,6,5,7,6,1, sequentially. Use the
numeric keypad to enter the number sequence. The ARROW keys will step you through the
test modes listed above, allowing you to skip tests or perform only specific tests.
3.
DISPLAY TEST.
4.
Press the OK key to enter the display test. Press the OK or ENTER key several times to
step through all of the LED’s on the display. Ensure that all of the LED’s illuminate. Press
and hold the OK or ENTER key to exit the display test.
Diagram 2.1 - 9.33 Display
Numeric
Keypad
OK key
Arrow Keys
RESET key
