COLLISION ALERT SYSTEMS
APS-SUPPLY.COM
www.aps-supply.com
APS USA
610 Gateway Center Way, Suites J & K
San Diego, CA 92102 USA
P: 1 619 263 4164
F: 1 619 263 6814
APS Australia
Unit 1, 72 Kent Way
Malaga WA 6090 Australia
P: 61 (8) 9248 4419
F: 61 (8) 9248 4901
APS: Singapore
Colombia
Chile
Perú
Brasil
Specifications
SENSOR SPECIFICATIONS (Typical)
Transmitter:
Pulsed RF transmitter at 5.8GHz operating under FCC Part 15.249
Electronics:
Solid state
Connector:
Deutsch DT06-08SA-E008
Sealing:
Encapsulated to protect from dust and moisture, designed to meet IP67.
Housing Material:
Polycarbonate radome
Dimensions:
4.4”H x 10.5”W x 1.4”D (11.2cm x 26.7cm x 3.6cm)
Weight:
2.3 lb. (1.04 kg)
Operating Temperature:
-40
°
F to +185
°
F (-40
°
C to +85
°
C)
Vibration:
25G RMS all three axes
Shock
25G all three axes
Mounting
Four 0.25” (6.4mm) diameter holes on 8.54” horizontal centers and 2.00” vertical
centers. Unit is supplied with #10 SS screws for mounting purposes. Recommended
torque is 22 inch-lbs.
ELECTRICAL SPECIFICATIONS
Input Voltage:
9-33VDC, over voltage protected to 150V
Input current:
0.2 amp maximum, inrush current limited to 1A
Polarity:
Negative ground, Polarity protected to 150V
Power Connection:
Two 20 AWG wires, connect to reverse signal lamp circuit
Auxiliary Output:
Single 20 AWG wire, +150V tolerant
Active State: switched to ground, over current protected to 1 amp sink maximum.
Inactive State: high impedance
OPERATING CHARACTERISTICS
Detection Range:
User Adjustable from 10-20 FT (3-6M)
Warning Ranges:
User Adjustable
COMMUNICATION
Wireless
ZigBee 2.4GHz, IEEE 802.15.4 compliant DSSS baseband
Data Update Rate
125mS
MAINTENANCE
Daily: Follow test and maintenance procedure.
REGULATORY COMPLIANCE
Compliant with FCC Part 15.249 & FCC part 15.247
FCC ID: OXZWWS72XX
PRODUCT MANUFACTURED IN THE USA
