2
Mounting
To prevent damage to the
FRX-322 while driving, mount it in a
secure place. Choosing the appropriate location will depend
upon your vehicle and the complexity of your system design. Typical
mounting locations for your new
FRX-322 would be in the dash or
center console. Never mount the component in a location that would
subject it to immersion or exposure to water.
MOUNTING
Once a location has been chosen, securely mount the
FRX-322 using
the two supplied brackets. There are two different sets of brackets
included with your
FRX-322. One set is used to flush mount the FRX-
322, as shown above. The other set is used to surface mount, as
shown on the next page. The brackets are connected to the equalizer/
preamp by two 6-32 x 1/4" socket head cap screws. We have made
the brackets adjustable to compensate for the uniqueness of each
vehicle. Be Careful! Inspect the area underneath to be sure you are
not drilling into wires, etc. that could be damaged by the drill bit or
screws.
BACK TO CONTENTS
