PRECISION DIGITAL pd6300, Инструкция по эксплуатации

Страница: 70 / 90

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
70
Display Parameter Action/Setting
Tr dLY Transmit delay Set transmit delay for serial
communication
Parity Parity Select parity:
Even, Odd, or None with 1 or 2 stop bits
t-byt Time byte Set byte-to-byte timeout
SelEct Select
Enter the Select menu (function, cutoff,
out)
Functn Signal input
conditioning
Select linear only, other functions are not
applicable to pulse input
Linear Linear
Set meter for linear function and select
number of linearization points
No PtS Number of
points
Set meter for 2 to 32-point linearization
CutofF
Cutoff Set low-flow cutoff
Count
Count Set the totals to count up or down from a
set value
Tot C
Total count Set the total to count up to or down from
the programmed total value
Gtot C
Grand total
count Set the grand total to count up or down
from from the programmed grand total
value
AoutPr
Analog output
programming Program analog output parameters
Source
Source Select source for the 4-20 mA output
O-rang
Overrange Program mA output for display overrange
u-rang Underrange Program mA output for display underrange
mAx Maximum Program maximum mA output allowed
min Minimum Program minimum mA output allowed
Calib Calibrate
Calibrate 4-20 mA output (internal
reference source used for scaling the
output)
4 mA 4 mA output
Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
20 mA 20 mA output
Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
user User I/O
Assign function keys and digital I/O
F1
F1 function key Assign F1 function key
F2
F2 function key Assign F2 function key
F3
F3 function key Assign F3 function key
F4 F4 function Assign F4 function (digital input)