PRECISION DIGITAL pd6300, Инструкция по эксплуатации

Страница: 46 / 90

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
46
Calibrating the Meter with External Source (
Cal
)
To scale the meter without a signal
source refer to
K-Factor Calibration (Factor) on page
41 or Scaling the Meter (
SCALE
) on
page 42
The meter can be calibrated to display the process variable in
engineering units by applying the appropriate input signal and following
the calibration procedure.
The use of a calibrated signal source is strongly recommended to
calibrate the meter.
There is no need to warm up the meter before
performing the calibration procedure.
The displ ay flashes
while sensing
the inputs