PDW30 Point-to-Point Wireless Bridge Instruction Manual
17
Primary Device Menus
Analog Input Setup
Enter the
Analog Input
menu to set up the wireless unit to accept either a current or a voltage input.
The current input is capable of accepting a signal from 4 to 20 mA. The voltage input is capable of accept-
ing a 0 to 10 VDC signal, 0 to 5 VDC signal, or 1-5 VDC signal.
Digital I/O Setup
All four digital connections may be set as either inputs or outputs. The setting on the primary unit deter-
mines the corresponding digital connection on the secondary unit. For instance, if digital connection num-
ber one is set as an input on the primary unit, it will be an output on the secondary unit.
Each digital connection may be set independently as either an input or output.
SETUP
ANALOG INPUT
NOW: 4-20mA
ANALOG INPUT
SETUP MENU
BACK TO
SET: 4-20mA
ANALOG INPUT
SET: 0-10V
ANALOG INPUT
SET: 0-5V
ANALOG INPUT
SET: 1-5V
ANALOG INPUT
SETUP
DIGITAL IO
NOW: INPUT
DIGITAL I/O #1
NOW: INPUT
DIGITAL I/O #2
NOW: INPUT
DIGITAL I/O #3
NOW: INPUT
DIGITAL I/O #4
SETUP MENU
BACK TO
SET: INPUT
DIGITAL I/O #1
SET: OUTPUT
DIGITAL I/O #1
