PD6800-0L1 Explosion-Proof Loop-Powered Process Meter
Instruction Manual
13
Setting Up the Meter (
SETUP
)
The
Setup
menu is used to select:
1. Decimal point location
2. Scale in engineering units
3. Tank indicator 0 and 100%
4. Lower display selection
5. Turn on/off bargraph (Tank indicator)
Press the
ENTER
button to access any menu or
press
UP
arrow button to scroll through choices.
Hold
MENU
, at any time, to exit and return to Run
Mode. Changes made to settings prior to pressing
ENTER
are not saved.
Press the
MENU
button during Programming Mode to
return to the previous menu selections.
Setting Numeric Values
The numeric values are set using the
RIGHT
and
UP
arrow buttons. Press
RIGHT
arrow to select next digit
and
UP
arrow to increment digit.
The digit being changed blinks.
Press the
ENTER
button, at any time, to accept a
setting.
Hold
MENU
, at any time, to exit and return to Run
Mode. Changes made to settings prior to pressing
ENTER
are not saved.
Press the
MENU
button during Programming Mode
to return to the previous menu selections.
Setting the Level Decimal Point
(
DECIMAL
)
Decimal point may be set with up to four decimal
places or with no decimal point.
Pressing the
Right
arrow moves the decimal point
one place to the right and pressing the
Up
arrow
moves the decimal point one place to the left.
