Precision Digital Corporation Loop Leader PD6600 Series, Инструкция по эксплуатации

Страница: 47 / 51

PD6600 Series Loop-Powered Process Meters Instruction Manual
47
Runtime & Cycle Count (
INFO
)
The relay information menu shows runtime and cycle
count for each relay. These values may be cleared at
any time by selecting the
Clear option (
CLEAR?
). If
the cycle count or runtime values need to be changed
on a frequent basis, it would be convenient to set up a
front panel button or the digital input to simplify this
process.
Note: See the menu tree under Solid State Relay
Outputs (
RELAY
) on page 34 for complete menu
structure on this feature.
Meter displaying the
amount of time a relay
has been activated Meter displaying the
number of times a relay
has cycled
Changing Engineering Units
During operation of the meter, it is possible to change
the display units within the selected unit class without
the need to re-scale the meter. The
UNITS
menu in the
DISPLAY
menu allows the unit of measure to be
changed (e.g. from gallons/second (
GAL/s
) to
liters/second (
L/s
)) and the meter will automatically
convert the display values to the new unit of measure.
If entering a custom unit (
CUSTOM
), a custom
conversion factor will need to be entered. See
Changing the Engineering Units (
UNITS
) on page 29 .
INFO
RELAY 1
RELAY
RUNTIME
Flashes
Momentarily
TIME
195.0 H
CYCLE
COUNT
CYCLE
51
RLY 1
CLEAR?
Flashes Momentarily