Model No. BI-2000NT-CB20C1
Page 5of 8
JUNE 2011
OPERATING INSTRUCTIONS
1.
Ensure electrical supply matches the specifications of the data plate located on the base of the unit.
2.
Place pan on the centre of the ceramic top.
3.
Press power “+/ON” key, power indication lamp will be on.
4.
If the heating indictor light is on, then the pan is heating.
5.
Press “-” or “+/ON“ adjust keys to required setting. The LED display will show the setting 1~9.
NOTE
6.
If the heating indicating light is OFF and there is a bibibibi (short) sound it indicates that the power is on
but the pan is not suitable OR there is no pan on the ceramic top. The bibibi will sound for 60 seconds
and then automatically turn off.
7.
The unit is equipped with an "OVER HEATING DEVICE", which will stop the power when the
temperature of the cookware base is too hot.
The power will automatically start once the temperature of the ceramic plate is reduced.
The heating indicator light will flash to show that the overheating protection function has been activated.
CAUSE OF OVERHEATING
If an empty pan is placed on the ceramic top and the heat is set at maximum, the ceramic surface will
reach a high temperature very quickly. Once the pan is removed from the unit or food/ liquid is added,
the surface temperature of the ceramic top will reduce very rapidly.
CONTROL PANEL
