prana 340S, Руководство по установке

Страница: 6 / 28

6
• The air ducts must be equipped with grills or other device
preventing free access to the fans.
• Do not locate the junction box at the lowest point of the
product to prevent condensation and risk of shorting. Do not
expose the product to water. Do not install or maintain the
product with wet hands.
Always keep the conductive parts of the network dry,
insulated and inaccessible in order to prevent accidents or
short-circuits in the network.
• Do not install heating equipment for air intake. Incomplete
combustion products can cause an accident.
• When using the system with other ventilation systems
in operation in the same room, the performance of the unit
may differ.
• Use the product only for its intended intended use.
• The air being conveyed must not contain inflammable
or explosive mixtures, chemically active vapors, sticky
substances, fibrous materials, coarse dust, soot, grease, or
media that promote the formation of harmful substances
(poison, dust, pathogenic microorganisms).
• To avoid reverse draught in rooms where fireplaces, gas
heaters and other equipment producing or different gas
mixtures are in operation, the «Separate control» mode must
not be used.
•Do not block the condensate drain, as this may cause
equipment failure and water ingress into the room.