prana 340S, Руководство по установке

Страница: 25 / 28

25
Terminals (L1, L2, L3):
380V power connection.
BUS (N):
Can be used as earthing circuit if needed.
The terminal «heating sensor sensor» is connected to the
terminal, which is in the heating sensor number 1,2.
The terminal of heating sensor 1,2,3:
Connects to the terminal that is on the STRAIN GAGE
numbered 5,6,7.
KDT - channel temperature sensor on the wire is mounted
in the ventilation duct.
THESE TERMINALS ARE LOCATED ON THE CONTROL UNIT
PRANA 340 DP
The ventilation system is connected to the control unit.
Terminal (HEATR) MINI HEATER:
Connects to the same «HEATR» terminal on the PRANA
340S ventilation system. (If the system is equipped with the
miniheat function).
CLEMES (SUPPLY) and (EXTRACT): Connects to
The same contacts on the PRANA 340S ventilation system.
EXTRACT L(BLACK), EXTRACT N(BLUE),
SUPPLY L(BLACK), SUPPLY N(BLUE).