Praher Plastics Aquastar Comfort 1001, Руководство пользователя

Страница: 39 / 60

11 www.praherplastics.com
12 Function of membrane keyboard
OFF
Pressing this key switches of the equipment, regardless of the valve position
ON
Pressing this key (yellow control lamp is illuminated) switches on the equipment,
valve goes to basic position - Filter
TEST
Pressing this key (green control lamp is illuminated) triggers the backwash cycle
fort he length of a backwash procedure
DRAIN
Pressing this key (red control lamp is illuminated) sets the valve to position „Waste“
Water is being drained into the sewer system
Only with Comfort 3501 / 4501 / 6501 by additional filter pump control
MANUAL
Pressing the MANUAL key makes the filter pump change from automatic to manual
operation. Filter pump switches on (independent from clock program)
AUTOMATIC
Pressing this key makes the filter pump change to automatic operation and only at
the set filter timest he filter pump switches on (independent from clock program)
12.1 Circulate
In order to set the automatic 6- way backwash
valve to position “CIRCULATE“ and afterwards
again to position “FILTER’, following steps
have to be made:

Go to basic position press key „ON“

Press keys „TEST “ and „DRAIN“ at the
same time (min. 4 sec) until the LED of
“TEST” is illuminated
ATTENTION!
After simultaneous pressing of the keys first the LED
of „TEST“ is illuminated and then the “DRAIN” LED
briefly. Only then the LED of “TEST” starts blinking

After „CIRCULATE“ is finshed, press OFF

Go to basic position press key „ON“