ITX 3000/2000 Printer User Manual
(UMITX315.PDF
)
Page 81 of 82 Date: 7/27/04
The first three columns list the distance from the
leading edge of the ticket to the registration
mark (LEtoRM) for a sensor setback position of
(SD) for the ticket lengths (T
L
) shown.
The second three columns define an alternate sensor
position that can be used if the ticket stock is feed in
the opposite direction. This might be done if the tickets
were made with the mark in the wrong side.
SD
6.7
=
T
L
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
5.00
5.25
5.50
5.75
6.00
6.25
6.50
6.75
7.00
7.25
7.50
7.75
8.00
8.25
8.50
8.75
9.00
9.25
9.50
9.75
10.00
=
LEtoRM T
L
( )
0.70
2.20
1.70
1.20
0.70
0.20
3.20
2.95
2.70
2.45
2.20
1.95
1.70
1.45
1.20
0.95
0.70
0.45
0.20
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
6.70
=
RM
W
0.5
=
TEtoRM T
L
( )
0.80
-0.45
0.30
1.05
1.80
2.55
-0.20
0.30
0.80
1.30
1.80
2.30
2.80
3.30
3.80
4.30
4.80
5.30
5.80
-0.45
-0.20
0.05
0.30
0.55
0.80
1.05
1.30
1.55
1.80
2.05
2.30
2.55
2.80
=
ALT_Sensor_Position
T
L
( )
4.80
4.05
5.30
3.80
4.80
5.80
6.80
4.05
4.80
5.55
6.30
"----"
"----"
"----"
3.80
4.30
4.80
5.30
5.80
6.30
6.80
"----"
"----"
"----"
"----"
"----"
"----"
"----"
"----"
"----"
"----"
"----"
"----"
The
first column
(single entry) is the sensor setback position used to determine the reg-mark location (normally 6.7").
The
second column
represents a range of ticket lengths.
The
third
column
shows the distance from the leading edge of the ticket to the reg-mark, for a sensor position of SD.
The
fourth column
(single entry) is the registration mark 's width in the paper movement direction.
The
fifth column
is the distance from the trailing edge of the ticket to the reg-mark. Note: that when this number is
negative the reg-mark is printed across the trailing/leading edge of the ticket(s). The alternate sensor position
shown below uses this to make the correct position calculation.
The
sixth column
shows an alternate sensor position which can be used for these tickets when they are feed in the
opposite direction (for a sensor is on the opposite side). Note: "---" indicates the adjustment cannot be made.
