50
0
Ω
C
PU
E
E
P
R
O
M
D
/ A
Safety
11
24
23
22
21
13
14
50
Ω
33
31
12
A
/ D
P
T
C
C
JC
0
.2
m
A
43
44
42
41
10
Ω
M
U
X
4
3
2
+
-
+
-
1
2
50
.0
VALVE 5
l / min
V
V
m
A
m
A
I+
10 V
1 V
41
16
+
-
*
48
49
bloCk diagraM
Potentiome ter
2-wire transmitter
Voltage
Current
R
TD og lin.R,
connection,
wir
es
Supply
Supply
21.6...253 V
AC or
19.2...300 VDC
Gnd.
I + V
Out.
I
Out.
V
Out.
TC
Relay 2
Relay 2
Relay 1
Relay 1
Gr
een
Red
Yellow
Yellow
ConfigUraTion /
oPeraTing The fUnCTion keys
Documentation for routing diagram.
in general:
When configuring the 4116, you will be guided through all parameters and you
can choose the settings which fit the application. For each menu there is a
scrolling help text which is automatically shown in line 3 on the display.
Configuration is carried out by use of the 3 function keys:
1
will increase the numerical value or choose the next parameter
2
will decrease the numerical value or choose the previous parameter
3
will accept the chosen value and proceed to the next menu
When configuration is completed, the display will return to the default state 1.0.
Pressing and holding
3
will return to the previous menu or return to the default
state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default state
(1.0) without saving the changed values or parameters.
further explanations:
fast setpoint adjustment and relay test: These menus allow you to make a
quick setpoint change and relay test when the FastSet menu is activated.
This function can only be activated when the relays are set for setpoint
function and are controlled by a setpoint.
Pressing
1
and
2
simultaneously will activate a relay test and change the
state of the relay.
Pressing
3
will save the setpoint change.
Holding down
3
for more than 1 second will return the unit to the default state
without saving the setpoint change.
Password protection: Programming access can be blocked by assigning a
password. The password is saved in the transmitter in order to ensure a high
degree of protection against unauthorised modifications to the configuration.
Default password 2008 allows access to all configuration menus.
Or
der
separately:
CJC
connector
5910
