manualshive.com logo in svg

PR 9116 Series, Руководство пользователя

Поделиться
Скачать
PR 9116 Series Скачать руководство пользователя страница 66

16 

Version No. V3R0

Safety Manual 

9116 UniverSal converter

 

OUT.LO

Selected temperature value for 0% output for IN.TYPE = TEMP 
in units defined by the UNIT parameter (°C or °F)
Range is defined by the selected temperature sensor (SENSOR 
and TC.TYPE, Ni.TYPE or Pt.TYPE), but value must be less than 
OUT.HI - minimum span.

OUT.HI

Selected temperature value for 100% output for IN.TYPE = 
TEMP in units defined by the UNIT parameter (°C or °F).
Range is defined by the selected temperature sensor (SENSOR 
and TC.TYPE, Ni.TYPE or Pt.TYPE), but must be larger than 
OUT.LO + minimum span.

RESP

Analogue output response time in seconds.
Range is 0.0 to 60.0 seconds.

USE.CAL

Use the applied process calibration values:
NO = The last performed process calibration is not used. The 
channel operates with accuracy as specified.
YES = The last performed process calibration is in operation. 
The required accuracy must be verified by user.
End user must verify by test that the applied process calibration 
does not introduce failures exceeding the requirements for the 
safety application.

 
Note5: Value not allowed if analogue output is used in a safety application (EN.SIL = 
YES) and IN.TYPE = CURR and loop supply is used to supply a current input signal. 
Note6: Error detection is enabled if ERR.ACT ≠ NONE, but analogue output value 
is undefined.

14.2.  Verification procedure

The verification is done using the display / programming front PR 4501 and 
following the procedure described below.

Содержание 9116 Series
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды