manualshive.com logo in svg

PR 5714, Руководство пользователя

Поделиться
Скачать
PR 5714 Скачать руководство пользователя страница 4

2 5714V103-UK

SYMBOL IDENTIFICATION

Triangle with an exclamation mark

: Warning / demand. Potentially 

lethal situations. 

 

The CE mark

 proves the compliance of the device with the essen-

tial requirements of the directives.

WARNING

This device is designed for connection to hazardous electric vol-

tages. Ignoring this warning can result in severe personal injury 

or mechanical damage. To avoid the risk of electric shock and fire, 

the safety instructions of this manual must be observed and the 

guidelines followed. The specifications must not be exceeded, 

and the device must only be applied as described in the follo-

wing. Prior to the commissioning of the device, this manual must 

be examined carefully. Only qualified personnel (technicians) 

should install this device. 
If the equipment is used in a manner not specified by the 

manufacturer, the protection provided by the equipment may be 

impaired.

WARNING

Until the device is fixed, do not connect hazardous voltages to 

the device.
The following operations should only be carried out on a discon-

nected device and under ESD safe conditions:
Troubleshooting the device.

Repair of the device must be done by PR electronics A/S only.

GENERAL

HAZARD - 

OUS

VOLTAGE

Содержание 5714


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды