PR Lighting XLED 1037 PR-8120, Руководство пользователя, Страница: 11 / 16

11/16
TROUBLESHOOTING
PROBLEM ACTION
The projector can’t be started
¾ Power Cable not connected well
¾
Power supply damaged or not connected well, a qualified Technician
should be required
¾ Control board not connected well and a qualified Technician should be
required.
The lamp can be started, but LED lamps are off
and not controlled
¾ LED boards not connected properly, a qualified technician is needed
A projector’s lamps are on but it doesn’t respond
to the controller
¾
Make sure that the projector’s start address is correctly set
¾ Replace or repair the DMX cable.
The beam appears dim and its brightness slows
sharply ¾ Ambient temperature too high which result in a projector overheating,
necessary ventilating measures needed.