5/20
●
TROUBLESHOOTING
PROBLEM ACTION
The projector doesn’t switch on
¾
Check the fuse on the power socket.
¾
Check the lamp.
The lamp is on but the projector doesn’t respond
to the controller
¾
Make sure that the fixture’s start address is right
¾
Replace or repair the XLR signal cable.
The projector functions intermittently
¾
Make sure the fan is working well or fans and their shields are not blocked
Beam appears dim, Low in brightness
¾
Make sure the lamp is within its lifespan
¾
Remove dust or grease from the lenses.
The project image appears to have a halo
¾
Carefully clean the lamp, optical lenses and other components.
Heavily Defective Beam
¾
Check if lens are in good condition(not cracked)
¾
Clean dust or grease on the lens.
3.
APPEARANCE
Head
Arm
Base
Control Panel
