SYMbOL IDENTIFICATION
Triangle with an exclamation mark: Warning / demand .
Potentially lethal situations .
The CE mark proves the compliance of the module with
the requirements of the directives .
The double insulation symbol shows that the module is
protected by double or reinforced insulation .
WARNING!
This module is designed for connection to hazardous electric
voltages . Ignoring this warning can result in severe personal
injury or mechanical damage .
To avoid the risk of electric shock and fire, the safety instructions
of this manual must be observed and the guidelines followed .
The electrical specifications must not be exceeded, and the
module must only be applied as described in the following .
Prior to the commissioning of the module, this manual must be
examined carefully .
Only qualified personnel (technicians) should install this module .
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired .
WARNING!
Until the module is fixed, do not connect hazardous voltages to
the module . The following operations should only be carried out
on a disconnected module and under ESD safe conditions:
Dismantlement of the module for setting of DIP-switches
and jumpers .
General mounting, connection and disconnection of wires .
Troubleshooting the module .
Repair of the module and replacement of circuit breakers
must be done by pR electronics A/S only.
WARNING!
To keep the safety distances, modules with two built-in relays
must not be connected to both hazardous and non-hazardous
voltages on the same module’s relay contacts .
SYSTEM 2200 must be mounted in socket type S3B Releco
(order no 7023) .
GENERAL
HAZARD-
OuS
VOLT AGE
INSTAL-
LATION
