Wall Mount with a 7 Axis Extendable Arm + Enhanced VESA 75-100mm Screen Pan and Tilt Head
PN’s 80005, 80005-3036 & 80005-3642
9
WWW.PRACTICALQUALITYSYSTEMS.COM
(818) 993-1022
ALL PRODUCTS PATENT PENDING
Installation Tips - How to Attach the VESA Pan and Tilt Head assembly to the back of a screen:
1. Lay the screen face down on a flat, smooth surface.
2. Hold the VESA pan and tilt head assembly securely, remove the five- point hand knob, lift off the VESA pan
and tilt head assembly and remove the rubber clutch washer from the top of the end of the arm.
3. Orient the flat bottom of the panning base of the VESA pan and tilt head assembly with the bottom of the
screen.
4. Set the VESA pan and tilt head assembly with the VESA mounting plate facing down on the back of the
screen.
4. Align the square pattern of either 75mm or 100mm spaced holes in the VESA mounting plate with the
pattern of four tapped holes on the back of the screen.
5. Carefully install the four supplied M4 screws through the holes in the VESA mounting plate and into the
tapped holes on the back of the screen.
6. Place the rubber clutch washer on the top of the end of the arm.
7. Carefully lift the screen with the attached VESA pan and tilt head assembly. Align the tapped hole in the
panning base with hole in the rubber clutch washer on the top of the end of the arm, reinstall the shaft of the
five-point hand knob up through the underside of the arm, through the rubber clutch washer and then carefully
thread it into the panning base.
