Wall Mount with a 7 Axis Extendable Arm + Enhanced VESA 75-100mm Screen Pan and Tilt Head
PN’s 80005, 80005-3036 & 80005-3642
3
WWW.PRACTICALQUALITYSYSTEMS.COM
(818) 993-1022
ALL PRODUCTS PATENT PENDING
Enhanced VESA 75-100mm Pan and Tilt Head with side-to-side tilt adjustment on an Offset Arm
Bracket
•
A universal mount that works with any 75mm or 100mm VESA compatible screen.
•
Tightening the two four-point knobs applies variable clutching resistance to allow adjustment of the up
and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the
four-point knobs to permanently secure the tilt position.
•
Tightening the five-point knob below the offset bracket applies variable clutching resistance to allow
adjustment of the side-to-side pan position of the screen. A 10-32 Phillips head screw in the center of
the lower panning plate can be tightened to permanently secure the pan position.
•
Tightening the three-point knob at the rear center of the VESA mounting plate applies variable
resistance to allow adjustment of the side-to-side screen tilt position.
•
Tighten the 10-32 Phillips head screw on the lower panning plate into one of the holes in the offset
bracket to permanently secure the pan position.
•
The offset bracket attaches the VESA pan and tilt head to the end of the arm and allows adjustment of
the up and down “offset angle” of the arm.
•
Adjusting the up and d
own position of the arm at the offset bracket: Remove the 1/4” wire-lock clevis
pin from the offset bracket to adjust the up and down position of the arm, then reinsert the pin into one
of the holes in the offset bracket and through the arm to secure the new position.
•
Includes (4) M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.
