8
2)
Solar Charging: The PPT Powerpack 400 is ready for solar connection. With integrated 10A
solar regulator and dedicated Solar input connection charge your PPT Powerpack 400
using the power of the Sun. The maximum recommended total solar panel input is 150W.
The PV panel output must be for 12V charging only (ie panel output voltage Vmp is approx.
17.5V). The supplied solar cable has ends prepared with MC4 connectors for a direct link to
a solar panel with the same connections. The 3pin connector should be inserted into the
solar connector (Front view right side panel
–
See Section 2.4 b). On successful connection
and in daylight the red LED charging light will be on. The PPT Powerpack 400 can be used
during solar charging and once fully charged the solar panel can be left connected if
required since the regulator will ensure the PPT Powerpack 400 is not over charged.
c)
Adding External Battery using supplied cable
The PPT Powerpack 400 battery capacity can be extended by connecting an external leisure battery.
The internal battery of the powerpack 400 is 18AH. By connecting a further battery using the
External battery cable essentially puts this battery in parallel to it to further increase the AH rating
eg. Internal battery 18AH + External battery 60AH = 78AH
The connection to the external battery is made using the supplied cable. One end is terminated with
a large connector that connects to the EXT Battery connector on the PPT Powerpack 400. The other
end has crocodile clips for direct connection to the external battery. There is an inline fuse holder
with 40A fuse on the cables to protect against short circuit.
Once the connection is made any charging via solar panel will be to both batteries. Any charging
indicators and battery check LED lights will now indicate based on the battery bank.
5-
Maintenance and Warnings
•
To prevent fire hazard do not obstruct ventilation overheating could occur
•
Keep away from fire or any corrosives
•
Risk of electrical shock, do not remove cover when in use.
•
Reverse polarity connection will blow internal battery fuse
•
Unit is not waterproof, water damage is not covered by the warranty
•
Ensure all connections are secure before use
•
If product becomes dirty simply wipe down with a damp cloth
6-
Warranty
