21
HumiTherm Plus for PC
User Manual
FACTORY
DOOR OPEN
Parameter Description
Settings
(Default Value)
Close : Door Open
The Door position is considered
Open
if the switch is CLOSE.
Open : Door Open
The Door position is considered
Open
if the switch is OPEN.
SWITCH LOGIC >>
(Default :
)
CLOSE : DOOR OPEN
CLOSE : DOOR OPEN
OPEN : DOOR OPEN
This parameter sets a timer. From the time the door is opened, the
timer begins counting down. If the door is not closed before the
timer reaches 0, the
Door Open
alarm is activated.
DOOR ALRM DLY (SEC) >>
(Default :
)
60 Sec
0 to 1000 Sec
(Default :
)
NO
YES
NO
Set to ‘Yes’ if Switch is mounted for detecting door
Open / Close
position.
ENABLE >>
FACTORY
MAINS FAILURE
Parameter Description
Settings
(Default Value)
(Default :
)
CLOSE : MAINS FAIL
CLOSE : MAINS FAIL
OPEN : MAINS FAIL
(Default :
)
NO
YES
NO
Set to ‘Yes’ if provision is made for running the controller on an
auxiliary power sources like battery or inverter and a Switch is
mounted for detecting main power source failure.
ENABLE >>
Close : Mains Fail
The CLOSE Switch position indicates that the Mains Power has
failed and the Controller is operating on auxiliary power source.
Open : Mains Fail
The OPEN Switch position indicates that the Mains Power has
failed and the Controller is operating on auxiliary power source.
SWITCH LOGIC >>
