PPA PIVO HOME Скачать руководство пользователя страница 2

2

3

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

Recommendation:

When istalling the operator, the PPA’s 

specialist installer must comply with all the 

instructions present on both this 

technical

 

manual 

and the 

user manual

By using the 

user manual

, the installer 

must present all information, uses and 

security items of the device to the end-user.

Prior to installing the operator, carefully 

read and observe the instructions 

contained herein.

- Prior to installing the operator, ensure 

that the local grid power complies with 

the technical data appearing on the gate’s 

label; 

- Do not connect the operator to the source 

of power until the installation / maintenance 

(or servicing) is over. Proceed the wiring of 

the control unit with the control box power 

switched OFF;

- After installing the operator, make sure 

the gate system is placed far enough from 

the sidewalk;

-The system’s power supply network 

MUST include a disconnection device (not 

supplied).

IMPORTANT SAFETY INSTRUCTIONS ........................................................................................ 3

TECHNICAL FEATURES ................................................................................................................... 4

BASIC TOOLS NEEDED FOR INSTALLATION ............................................................................ 5

ELECTRICAL CONNECTIONS ........................................................................................................ 5

PRECAUTIONS WITH THE GATE BEFORE THE INSTALLATION............................................ 7

INSTALLING AND MOUNTING THE OPERATOR ...................................................................... 7

TROUBLESHOOTING .....................................................................................................................14

Содержание PIVO HOME









Отзывы: