background image

When handling the antenna cables, it is 
essential you follow these basic rules:

 

Never pull on the cable connectors;

pull only on the cable.

Tighten the connectors and ensure

that the cables don’t rattle loose.

5. Safety

If you are installing an antenna for the first
time or unsure about how to install your
antenna, obtain the help of a professional
installer.

Carefully survey the installation site before
installation to locate secure handholds,
dangerous conditions (such as power lines
and weak roofs) and the safest and most
convenient placement for ladders if
necessary.

The antenna may not be used as a climbing
or pulling device.

Considerations must be taken when

mounting the antenna that people do not

hang or pull on it.

When installing your antenna, remember:

1.

Do not install near power lines as they can

electrocute you.

2.

Do not install on a wet or windy day or

when there is lighting or thunder in the area.

3.

Wear shoes with rubber soles and heels,

protective clothing (long sleeve shirt or

jacket) and rubber gloves.

4.

Avoid installation while under the

influence of drugs, alcohol or medication.

10

PCL-A-OMNI-070

4

www.ime.de

Содержание A-OMNI-0704-V1-01












Отзывы: