page no. 17 of 28
PZN Aquamatic Water Heater
Doc Ref M107 issue 1.3 Sep 2018.
Note: Do not disperse the parts of the
packaging in the environment, or leave them
within the reach of children, as they are
potentially danger. For proper disposal contact
your local authorities.
The unit is sent in a single case and includes:
− UNIT HEATER
− PLASTIC BAG (A) containing:
• Instruction Manual;
• Warranty Certificate;
• Spare Parts catalogue;
• Label with barcode;
The booklet is an integral part of the unit and should be
read carefully and kept for future reference.
The unit can be identified by either
• the Technical Data plate (positioned on the rear of the
unit) which shows the main technical /performance data.
• the packaging label that shows the code, model and
serial number of the unit.
In case of damage or loss, request a duplicate from
Technical Assistance.
The location for the unit must be determined by the
system designer or a competent person and it must
take into account the technical requirements and the
standards and regulations in force; generally, special
permissions need to be obtained. (e.g.: regulations
concerning zoning, architecture, fires, environmental
pollution, noise emission, etc.). It is therefore advisable,
before installing the unit, to request and obtain the
necessary permissions.
Note: For proper installation always observe
the following minimum requisites:
• position the unit on a dry level surface capable of
sustaining its weight;
• respect the distances in order to allow for a correct flow
of air and normal cleaning and maintenance operations;
• position the unit in a place that makes water and
electrical connections convenient;
• be close to an electric socket;
Note: It is also necessary to make sure that:
The temperature range for use is between -15
and +40 °C
Warning: It is forbidden to install:
• in places where there are aggressive
atmospheres;
• in narrow places where the noise created by the
generator could be amplified by reverb or resonance;
• in corners where there is a deposit of dust, leaves and
anything that may reduce the efficiency of the unit by
blocking the air passage.
The unit is normally installed on a shelf in a higher
position as shown in the following figures. In this case
make sure that the shelves are attached to a suitable
structure by means of suitable fixing elements.
The unit features a helical fan and it is therefore suitable
to be connected to ducts with important load losses. For
special requirements, consult the Manufacturer.
Example of installation in a small room:
Example of installation in a large room/area
:
