Powrmatic Eurotrol 2, Инструкция по установке и эксплуатации, Страница: 9 / 10

Basic & advanced operating modes
The eurotrol 2 is supplied in the BASIC operating mode:
This allows easy adjustment of the temperature set point after entering the first level
password and allows entering 3 switching programs per day
By selecting the ADVANCED operating mode, easy temperature set point adjustment
is limited to +/- 3°C (in the temp offset screen) without the use of a password.
The ADVANCED mode programs allow up to 3 switching programs per day each
with a different temperature set point if required.
Selecting operating mode
From the main screen
press
to enter the
password screen
e
From the password
screen press
to enter the main
menu
e
Note: the factory set password is
From the main menu
screen press
7 times to enter the
extended menu screen
From the extended
menu screen press
to enter the password
screen
e
From the main menu
screen press
Press or
to move to another
screen
From the password
screen press
to enter the
extended menu
e
Note: the factory set password is
Press or
to select basic or
advanced
Heating / Fan Only modes
A short press of either button will place the control into that
respective mode for the remainder of the day. (Indicated by a
flashing H for heating or F for fan only,in the display)
Pressing either button for 5 secs. will permanently place the
control into that respective mode. (Indicated by a ‘steady’ H for
heating or F for fan only, in the display)
Fan Only
Heating
Menu options
Turns the controller On or OFF.
Adjusts the set point temperature.
Sets temperature that heater operates during
fan only, heating off times and holiday periods.
May be turned OFF
Suspends the program while the buiding is unoccupied.
Enter first day of holiday and day of return.
Sets a new password.
Sets the switching differential for all set points.
Sets temperature that heater operates during
program OFF times. May be turned OFF
Sets the number of sensors connected.
Extends the current program when
is pressed for 5 secs. Override
Sets the level of user button access.
Run Mode
Set Temperature
Frost Temperature
Holiday Dates
New Password
Temperature Differential
Night Temperature
No. of Sensors
Extension Time
Button Access
12
9
e
Alternatively press to enter selection