Pow’R’kraft PK9715, Руководство оператора

Страница: 13 / 16

13 All terrain mini hauler
Problem
Cause Remedy
Engine fails to
start.
1. Spark plug wire disconnected.
2. Out of fuel or stale fuel.
3. Choke not in open position.
4. Blocked fuel line.
5. Fouled spark plug.
6. Engine flooding.
1. Attach spark plug wire securely to
spark plug.
2. Fill with clean, fresh gasoline.
3. Throttle must be positioned at choke
for a cold start.
4. Clean the fuel line.
5. Clean, adjust gap, or replace.
6. Wait a few minutes to restart, but do
not prime.
Engine runs
erratically.
1. Spark plug wire loose.
2. Unit running on CHOKE.
3. Blocked fuel line or stale fuel.
4. Vent plugged.
5. Water or dirt in fuel system.
6. Dirty air cleaner.
7. Improper carburetor adjustment.
1. Connect and tighten spark plug wire.
2. Move choke lever to OFF.
3. Clean fuel line. Fill tank with clean,
fresh gasoline.
4. Clear vent.
5. Drain fuel tank. Refill with fresh fuel.
6. Clean or replace air cleaner.
7. Refer to
Engine Manual .
Engine overheats.
1. Engine oil level low.
2. Dirty air cleaner.
3. Air flow restricted.
4. Carburetor not adjusted properly. 1. Fill crankcase with proper oil.
2. Clean air cleaner.
3. Remove housing and clean.
4. Refer to
Engine Manual .
TROUBLE SHOOTING
Do not use strong detergents or
petroleum based cleaners when
cleaning plastic parts. Chemicals can
damage plastics.
Inspect for any loose or damaged parts. Repair
or replace damaged parts and tighten loose
screws, nuts or bolts.
5.
Store your unit on flat ground in a clean, dry
building that has good ventilation.
6.
Do not store the machine with fuel in
a non-ventilated area where fuel fumes
may reach flame, sparks, pilot lights or
any ignition sources.
One of the two
tracks is blocked. Foreign bodies have worked their way
between the track and the frame.
Remove the foreign body.
Machine does not
move while engine
is running.
1. Gear is not properly selected.
2. Driving tracks not tight enough.
1. Ensure gear lever is not in-between
two different gears.
2. Tighten driving tracks.
Use clean cloths to clean off the outside of the
machine and to keep the air vents free of
obstructions. 4.