2
THE PRINCIPLE CHARACTERISTICS ARE:
- Painted sheet steel bodywork formed to give maximum strength at minimum weight.
- Reinforced polyethylene chassis in an elegant and indestructible design.
- Polyethylene tanks resistant to battery chemicals and to the most widely diffused industrial sol-
vents.
- Polyurethane coated wheels.
- Reduction motor for brushes with lifetime lubrication.
- Vacuum motor for liquids with dangerous parts and electrical contacts out of reach from opera-
tor’s hands.
- Ergonomic control panel with protected switches.
- Squeegee body with LYNATEX blades.
The customer must make sure that the operators have read or are aware of the contents of this
manual and that they adhere strictly to the indications listed. The manufacturer does not accept
any responsibility for damage caused to persons and/or property, or to the equipment itself if the
conditions described below are not respected. This manual is an integral part of the machine; it
must be carefully preserved for the lifetime of the machine, right up to decommissioning. Do not
alter or remove the label affixed to the machine. This manual describes a battery-powered floor
cleaner and dryer. It has been designed for ease of use, manageability and safety. Maintenance
has been simplified and reduced to a minimum in order to allow even untrained staff to carry
necessary servicing operations.
PFS28
Units
Productivity
sq.ft./hr/m
2
/hr
27,986/2600
Solution tank capacity
gallons/l
21/80
Recovery tank capacity
gallons/l
21/80
Cleaning path
in./mm
28/700
Squeegee width
in./mm
40.5/1030
Brush pressure
lbs./kg
110-154/50-70
Brush motor power
W/A
375/15.5 (x2)
Vacuum motor power
W/A
550/23
Drive motor power
W/A
200/8.5
Voltage
V
24
Batteries
2 x 12V
Dimensions
in./mm
58x31x43/1460x780x1100
Weight (without batteries)
lbs./kg
304/138
TECHNICAL SPECIFICATIONS
WARNING: The floor cleaner is intended for cleaning and washing level floors in closed
spaces using appropriate detergents.
