7
Fig. 1
To receive reliable service from this equipment, regular daily maintenance is a requirement.
Fabric cleaning, both carpet and upholstery, are very dirty environments for any equipment. The
following recommendations are offered.
1. Keep the equipment clean, both inside and out.
2. Lubricate brass quick disconnects with a quality lubricant such as WD-40®.
3. Flush solution systems after use with clear, clean water. A white vinegar solution may also be
used. This will counter-act hard water and alkaline deposits and aid in keeping orifices clean.
4. Do not allow fluid either in solution or recovery tank to sit overnight. The unit should be
emptied and cleaned daily.
5. Clean the strainer in the solution tank (Fig. 4) daily.
6. Do not use the same receptacle (pail) to fill solution tank that has been used to remove waste
water from recovery tank.
7. When the unit is not in use, leave the tank lids open.
8. At the end of each day, run the vacuum for 3 minutes with lid open.
Maintenance
Fig. 2
Fig. 3
1
1
22
33
44
55
66
88
99
77
