7
CONTROLS
Release the pedal handle lightly with your foot (1), pull back the handle (2) to start the motor.
The brushes and the drum starts rotating. Pulling the handle further without pressing the pedal,
lowers the machine and engages the rotating brushes onto the floor. To stop working, take the
handle to the vertical position.
1
2
OFF
ON
BEFORE
R E S E T
W A I T
S E C O N D S
3 0
!
P R E S S
On/Off Control
Pull Cable Connect / Disconnect Control
Insert the free end of solution cable into the valve body fitted in the auxiliary tank. Press and twist
clockwise to secure the cable end. Similarly, press and twist counter-clockwise to disconnect the
cable end.
Important
- Should the machine fail to operate, contact the supplier from whom you purchased the machine.
Transport/Working Mode Control
Slide this knob to TOP position (Working Mode) to operate the machine. Slide this knob to BOT-
TOM position to move the machine and park the machine.
Warning!
Keeping the knob in the top position (working mode) and moving the machine will
damage the brushes.
1
2
OFF
ON
BEFORE
R E S E T
W A I T
S E C O N D S
3 0
!
P R E S S
Brush Contact Control
Brush contact with the floor is adjustable in 4 steps, contact is MINIMUM when the knob is fully
down and MAXIMUM when it is fully raised. This helps you to compensate for the wear of brushes
and also to control the scrubbing effect. If the machine does not move when the handle is lowered,
slide the transport/working mode knob up one step.
1
2
OFF
ON
BEFORE
R E S E T
W A I T
S E C O N D S
3 0
!
P R E S S
Solution Control
By pulling the solution control handle up, the cleaning solution is dispensed on the floor. The solu-
tion stops once the solution control handle is released.
1
2
OFF
ON
BEFORE
R E S E T
W A I T
S E C O N D S
3 0
!
P R E S S
Motor Circuit Breaker
In the event of motor getting overloaded due to improper power supply or unexpected obstruction to
the brush/drum rotation, the circuit breaker trips and protects the motor from damage. If this hap-
pens, identify the cause, correct it and, reset the breaker after minimum of 30 seconds from tripping
by pressing the circuit breaker button manually and continue working.
1
2
OFF
ON
BEFORE
R E S E T
W A I T
S E C O N D S
3 0
!
P R E S S
https://harrissupplyind.com - To Order Parts Call 608-268-8080
