1.0
IMPORTANT SAFETY WARNINGS (cont.)
1.6
Machine Warning Tags and Specification Plate
FIG. 1.1 - INTERNATIONAL WARNING SYMBOLS LOCATED ON THE BELT GUARD OR FRAME:
1.
Warning Symbol
2.
Read Operating manual
3.
Wear Eye Protection
4.
Do not spray any person or animal
5.
Do not spray electrical components
6.
Do not touch hot engine
7.
Do not touch belt or moving parts during operation
FIG. 1.3- LOCATED ON THE FRAME BELOW THE PUMP:
FIG. 1.2 - LOCATED ON THE THERMOSTATIC RELIEF VALVE:
FIG. 1.4 - MACHINE SPECIFICATION PLATE
Model
Model name (i.e., PS3200).
Part No.
Machine part number assigned by the manufacturer.
PSI/BAR
Maximum pressure rating in pounds per square inch and barometric pressure measure-
ments.
Serial No.
Each machine is assigned an individual serial number.
GPM/LPM
Maximum water flow rating in gallons/liters per minute.
V/AMP/Hz
Motor rating in Volts, Amps, and Hertz. (Electric machines only)
Nozzle Size
Indicates the proper nozzle orifice size used with the machine.
Burner Fuel
Indicates type of burner fuel required. (Hot water machines only)
Max Inlet Water Temp
Maximum allowable incoming water temperature allowed.
RPM
Pump RPM.
PROTECT PUMP FROM FREEZING •
To prevent pump damage when machine is exposed to freezing
temperatures, water in system must be removed and replaced with anti-freeze solution.
Valve will open after excessive
heat buildup in system.
page 7
Engine Fuel
Indicates type of engine fuel required.
WWW.RONAPW.CA
