PowerWalker VFI 10000 CT LCD, Инструкция по эксплуатации

Страница: 26 / 81

24
6. Specifications
MODEL VFI 6000 CT LCD VFI 10000 CT LCD
CAPACITY* 6000 VA / 5400 W 10000 VA / 9000 W
INPUT
Voltage Range
Low Line Loss
110 VAC ± 3 % at 50% Load;
176 VAC ± 3 % at 100% Load
Low Line Comeback Low Line Loss V 10V
High Line Loss 300 VAC ± 3 %
High Line Comeback High Line Loss Voltage - 10V
Frequency Range
46Hz ~ 54 Hz @ 50Hz system
56Hz ~ 64 Hz @ 60Hz system
Phase Single phase with ground
Power Factor
≧
0.99 at 100% Load
OUTPUT
Output voltage 208/220/230/240VAC
AC Voltage Regulation ± 1%
Frequency Range
(Synchronized Range) 46Hz ~ 54 Hz @ 50Hz system
56Hz ~ 64 Hz @ 60Hz system
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Overload
AC mode 100%~110%: 30min; 110%~130%: 5min; >130% : 10sec
Battery mode 100%~110%: 3min; 110%~130%: 30sec; >130% : 10sec
Current Crest Ratio 3:1 max
Harmonic Distortion
≦
3 % THD (Linear Load)
≦
5 % THD (Non-linear Load)
Transfer Time
Line Battery 0 ms
Inverter Bypass 0 ms
EFFICIENCY
AC mode > 92% > 93%
Battery Mode > 90% > 91%
BATTERY
Standard
Model
Battery Type 12 V / 9 Ah
Numbers 16 20 16 20
Recharge Time 9 hours recover to 90% capacity
Charging Current
Default : 1 A ± 10%
Max.: 1A, 2A (Adjustable)
Charging Voltage 218.4V ± 1% 273V ± 1% 218.4V ± 1% 273V ± 1%
Long-run
Model
Battery Type Depending on applications
Numbers 16-20
Charging Current
Default: 4 A ± 10%
Max.: 1A, 2A, 4A, 6A (Adjustable, 6A is only available for 16pcs batteries)
Charging Voltage 218.4V ± 1% (based on 16pcs batteries)
PHYSICAL
Standard
Model
Dimension,DXWXH(mm) 369 x 190 x 688 442x 190 x 688
Net Weight (kgs) 61 74 66 76
Long-run
Model
Dimension, DXWXH(mm) 369 x 190 x 318 442x 190 x 318
Net Weight (kgs) 12 16
ENVIRONMENT
Operation Temperature
0 ~ 50°C
(battery life cycle will be shorten when
temperature is above 25°C)
0 ~ 40°C
(battery life cycle will be shorten when
temperature is above 25°C)
Operation Humidity <95 % and non-condensing
Operation Altitude** <1000m
Acoustic Noise Level Less than 55dB @ 1 Meter Less than 58dB @ 1 Meter
MANAGEMENT
Smart RS-232 or USB
Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux, Unix, and
MAC
Optional SNMP Power management from SNMP manager and web browser
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
**If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.
***Product specifications are subject to change without further notice.