Page 6
EN
Step 3- Connect battery cables to your batteries
The battery must be wired to match the units DC input voltage specifications
(12V for PowerWalker Inverter 1000VA,24V for PowerWalker Inverter 2000VA )
In addition, the batteries can be wired to provide additional run time. The various wiring configurations
are as follows:
Series Connection: Wiring batteries in “series” increases the total output voltage. This voltage
MUST match the DC voltage requirements of the PowerWalker Inverter unit, or it may damage both
the PowerWalker Inverter unit and/or the batteries.
Parallel Connection: Wiring batteries in “parallel” increases the total run time, the batteries can
operate the AC loads. The more batteries connected in parallel the longer run time the loads can be
powered from the PowerWalker Inverter unit.
Series-Parallel Connection: “Series-parallel” configuration increases both the battery voltage (to
match the DC requirements of PowerWalker Inverter unit) and run time for operating the AC loads.
