Page 4
EN
Operation & Installation
Front Panel Controls and LED Indicators
Shown below are the controls and indicator lights on the front panel of PowerWalker Inverter
series.
Rear Panel & Output Description
Shown below are the components on the rear panel of PowerWalker Inverter series.
1. DC Input Connector (Battery Terminal)
2. Input Protector
3. AC Input or IEC Inlet
4. Output Receptacle(s)
5. Input Voltage Range Selector: Input voltage range is defined in specification chapter, and output
voltage is the same as input voltage in ‘mains’ mode.
A.
Select ‘Narrow’ setting for general electrical appliance such as tube light,energy saving
lamp,TV,Juicer & mixer etc, but it is not suitable to meet high-power motor or inductive
