Powervar GTS Series, Руководство пользователя

Страница: 7 / 66

7 A01-00030 Rev D
Sinewave Output
The output voltage of all GTS UPM models is a true, low distortion
sinewave – the kind that the utility company provides to the wall
outlet and the kind that your equipment is designed to work with.
This provides guaranteed compatibility even with the most sensitive
electronic loads.
Voltage Manager
The voltage of the AC power source can often fluctuate from its nominal
rating. These deviations in line voltage are tolerated quite well by most
switch mode power supplies (the type used in your computer system).
However, some UPS products may misinterpret these transient changes
in line voltage as a power outage and erroneous battery operation
may occur. This type of activity results in unnecessary strain on the
battery and may eventually shorten its life. POWERVAR’s GTS UPM
products feature Voltage Manager – a circuit that constantly monitors
the AC power source. If minor changes in AC voltage occur, the Voltage
Manager adjusts the input voltage to the UPM circuitry so that erroneous
inverter operations are avoided. Ensuring that the UPM switches to
its batteries only in the event of a true power outage, results in longer
battery life and a lower cost for both maintenance and ownership.
Start Manager
Start Manager is special circuitry that enables the internal batteries and
allows you to start the GTS UPM from either the main AC supply or from
its own internal battery. On occasion, AC power may not be available –
such as when installing a system in a location where the electrical wiring
has not been completed. Start Manager allows you to start the UPM and
its connected system to perform final tests on both the UPM and the
computer systems it’s powering.
MopUPS Express
Many uninterruptible power systems provide only a basic software
interface with the computer system they protect. MopUPS Express