POWERUCC Panorama X2 Blackbox, Руководство пользователя

Страница: 27 / 32

27
Self-Diagnosis and Safety Precaution
Q1: How can I check the firmware?
A1:
Check the About section on the main home screen
You can check the available firmware version number(s) on our website,
where you will find continuing support.
Q2: Can I reinstall the Bl ackbox in another car and use it?
A2:
Yes, the X2 Blackbox may be mov ed between vehicles,
use existing mount or new mount as needed.
Q3: How can I format the micro- SD memory cards?
A3:
Y ou can format the micro- SD memory cards in setup mode
in your Blackbox.
Please format the micro- SD memory cards in your B lackbox
* The X2 will recognize pre-formatted memory cards.
* You can format a memory card in setup mode.
* It is recommended that < 32GB micro
- SD memory cards be
formatted in the blackbox. > 32GB micro - SD memory cards
should be pre-fomatted FAT32 in your PC for optimal results.
Q4: I install ed the blackbox. Is it possible to control the angle?
A4:
The joint can move 90 degrees. Ad j ustment s are limited.
Q5: Where is a suitable location to install the B lackbox?
A5:
Please install it without blocking the driver's view.
The B lackbox was designed for a car , but you can also use it at
home or in a store or in a business location. (It is recommended to
install the blackbox in a location you can watch the LCD monitor.)
Q6: How do I manually start and stop the X2 recording?
A6: You will see see a red box with a dotted outline at the bottom of the
screen.
Engine running - Touching anywhere in this area will toggle
start/stop recording . It is important to stop the recording before ejecting
the microSD cards. BAT(parking mode) This area will power off the X2