POWERTEX PLH-S1, Инструкция по эксплуатации

Страница: 5 / 18

4 5
Daily Yearly Inspection items Inspection method Note
Labels
X X Rating plate Visual If the plate is hard to read - replace it
Function
X X Raising and lowering function Test without load A low snapping noise should be audible
- X Raising and lowering function Try with 125% of rated load
over a distance of min. 300
mm. The lever runs easily. Load chain sprocket and chain
work well together Brake works. The chain does not twist
or tangle Hand pulling on the lever feels even
X X Selector Operation Easy to reset
X X Neutral Operation Function
Hooks
X
- X
Hook opening Visual
Measurement Looks normal
See Fig. 6 and Table 2
X Deformation Visual No visible deformation
X X Hook bearing Visual No abnormal play
X
- X
Wear, cracks, deformation and
corrosion Visuelt
Measurement No visible damage
See Fig. 6 and Table 2
X X Hook latches Visual Works, spring entire
Chain
X
- X
Pitch Visual
Measurement Looks normal
Measure in case of doubt
See Fig. 7 and Table 3
X
- X
Wear Visual
Measurement Looks problem-free. Measure in case of doubt
See Fig. 7 and Table 3
X X Deformation Visual No deformation. Measure in case of doubt
X X Cracks etc. Visual No cracks
X X Rust Visual No rust
Housing
X X Housing Visual No deformation and no rust
- X Operating lever Visual No deformation
- X Load chain sprocket Visual after dismantling No serious wear or cracks. No fractures or deformation
- X Bearings Visual, testing No damage, smooth running
- X Gears Visual after dismantling No serious wear or fractures
X X Chain stopstop Visual Must be free of deformation
Screws
X X Screws, nuts, rivets, cotters
etc. Visual Must not be missing. Tighten loose items. Replace as
necessary
Brake
- X Brake disk Visual Replace if worn
- X Brake screw Visual No serious wear
- X Pawl and ratchet. Visual Replace worn parts. Carefully lubricate with grease
Checklist for periodic checks
(normally yearly – more frequently if necessary)