POWERTEX 16.25PAPHS10080, Руководство пользователя

Страница: 4 / 18

4
Don’t extend the lever length. Abort the lifting process straight away if the load needs more power for lifting or lowering it.
Never be on top of the load and make sure no one is working close or under the load that is being lifted.
Don’t let the load spin during the lift. Avoid to impact, shock or swinging the load.
Only direct loading. The wire rope hoist must not be exposed to a bending load, were the wire is loaded in an improper way. Use the wire rope hoist
by keeping the wire rope hoist hook and anchor peg in line with each other. Don’t load on the tip of the hook. Loading with the hook is only allowed
in the longitudinal direction and the load has to be directed to the middle of the hook’s radius.
The working load limit which is marked on the product must not be exceeded.
Don’t use other wire ropes that aren’t from the distributer and accepted by the manufacturer. When the diameter of the wire has reduced more than
10% in dimension it has to be changed immediately. Don’t insert the wire rope from the front of the wire rope hoist, since the hook will be on the
wrong side.
Keep the wire rope hoist clean, don’t let any dirt into it, mud or any other harmful substance that could break or wear down the wire rope hoist.
Lubricate the wire rope hoist frequently.
Never lift or pull people with the wire rope hoist.
Never leave the load without supervision.
Don’t ever use a hammer etc. for releasing the release lever.
Maintenance, inspections and repairs
Maintenance: The wire rope hoist and wire must be washed, dried after use in wet conditions and protected from corrosion
Inspections: The product must be clean when checked. The product must be checked before every use in case of visible damage. Once a year a
competent person must check the product thouroughly. This time period must be shortened if the working conditions require it. When checking the
product it has to be checked visually and also tested. Parts and components should be checked for damage, wear, corrosion etc. and also analyze
the wire rope hoists workability as a safe lifting tool. The wire rope hoists clamps should be checked by testing them with the nominal load capacity.
If you notice any deviation on the wire rope hoist it should be disassembled and inspected thoroughly by a competent person.
Repairs: All possible repairs concerning the wire rope hoist and wire rope are to be made by the seller’s authorized technicians.