PowerTec BF601, Руководство пользователя

Страница: 8 / 16

TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION
Motor does not run. 1. Machine not plugged in. 1. Plug power cord into electrical receptacle.
2. Power switch in OFF position. 2. Place ON/OFF switch to ON position.
3. Power cord is faulty. 3. Replace power cord.
4. Fuses or circuit breaker is open. 4. Overloaded electrical circuit.
Motor stalls or runs
slow. Undersized or excessive length of
extension cord. Use correct size.
Decreased
performance Accessory is dull or damaged Replace accessory, always use sharp
accessories.
Motor runs hot 1. Motor is overloaded. 1. Reduce pressure on workpiece.
2. Poor air circulation around motor. 2. Remove any blockage around motor.
3. Accessory is dull or damaged 3. Replace accessory, always use sharp
accessories.
4. Undersized or excessive length of
extension cord.
4. Use correct size.
Fuse blows or circuit
breaker trips. 1. Motor is overloaded. 1. Reduce pressure on workpiece.
2. Overloaded electrical circuit breaker. 2. Reduce the amount of items on circuit
3. Wrong fuse or circuit breaker 3. Replace with correct fuse or circuit breaker.
4. Defective cord, plug or switch creating a
short circuit.
4. Replace with new parts
5. Undersized or excessive length of
extension cord.
5. Use correct size.
6
TROUBLESHOOTING
6