INSTRUCTION SHEET
6" RANDOM ORBITAL SANDER
QUESTION...
1•847•780•6120
!
SPECIFICATIONS
Free Speed: . . . . . . . . . . . . . . . . . . . . . . . . . . 12000 RPM
Pad Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6" (150 mm)
Orbit Diameter: . . . . . . . . . . . . . . . . . . . . 3/16" (5 mm)
Spindle Thread: . . . . . . . . . . . . . . . . . . . . . . . . . . 5/16"- 24
Air Inlet: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
Hose Size: . . . . . . . . . . . . . . . . . . . . . . . . 3/8" (10 mm) I .D .
Air Pressure: . . . . . . . . . . . . . . . . . . . . . . 90 P .S .I . (6 .2 Bar)
Air Consumption: . . . . . . . . . . . . . . . . . . . 2 CFM (57 L/Min)
IMPORTANT SAFETY INSTRUCTIONS
WARNING
For your own safety, read and understand all warnings and
operating instructions before using any tool or equipment .
WARNING
Improper operation or maintenance of this product could
result in serious injury and property damage . When using
air tools, basic safety precautions should always be
followed to reduce the risk of personal injury .
WARNING
Some dust created by operation of power tool contains
chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm . To reduce your
exposure to these chemicals, work in a well ventilated
area and work with approved safety equipment . Always
wear OSHA/NIOSH approved, properly fitting face mask or
respirator when using such tools .
WARNING
Failure to follow these rules may result in serious personal
injury . Remember that being careless for even a fraction of
a second can result in severe personal injury .
WARNING
• Work in a clean, well ventilated area free of
combustible materials .
• Avoid prolonged use: repetitive motion or exposure to
vibration may be harmful to your hands or arms . Use
gloves to provide extra cushion, take frequent rest
periods, and limit daily time of use . If numbness, tingling,
pain or whitening of the skin occurs, stop using the tool
and consult a physician .
• Always wear safety glasses and ear protection during
operation . Always wear approved safety glasses with
shields . Always wear approved hearing protection .
• Do not operate power tools in explosive atmospheres,
such as in the presence of combustible liquid, gases or
dust . Power tools create sparks which may ignite the dust
or fumes
• Do not exceed maximum air pressure of 90 PSI or as
stated on nameplate .
• Use compressed air only .
• Read all manuals included with this product carefully .
• Disconnect the air supply before making any
adjustments, changing accessories or storing the tool .
Always disconnect the air supply before performing any
inspection, maintenance or tool cleaning .
• Do not wear loose fitting clothing or apparel which
contains loose straps or ties, etc . Which could become
entangled in moving parts of the tool and results in
serious personal injury .
• Do not wear jewelry, watches, identifications,
bracelets, necklace, etc . When operating any tool,
they may become caught in moving parts and result in
serious injury .
• Do not depress trigger when connecting the air
supply hose .
• Use only accessories recommended by the manufacturer
for this tool .
• Do not use damaged or worn attachments .
• Do not leave the tool unattended when it is connected to
an air supply .
• Secure and support the work piece to a stable platform .
• Do not force the tool . Use the correct tool for your
application . Using the correct tool which is specifically
designed for a select job will provide better tool
performance and make the job easier .
• Never trigger the tool when not applied to a work
object Attachments must be securely attached . Loose
attachments can cause serious injury .
• Do not put hands near or under moving parts .
You will need this manual for safety instructions, operating procedures, and warranty .
Put it and the original sales invoice in a safe, dry place for future reference .
Visit us on the web at
www.southerntechllc.com
Southern Technologies, LLC
3816 Hawthron CT,
Waukegan, IL 60087
Model No. AS63160
16-1005
