POWERSTIXX SL-8226, Руководство пользователя

Страница: 12 / 36

12
D
GB
F
E
I
8. Press the On/Standby button on the remote control to switch the
system on.
LED : The LED on the front of the subwoofer will light blue, indicating
that the device is on.
Note
: Since each sound card has a different design, the manual cannot
give detailed information on how to connect to 5.1 sound cards. More
information is available from the technical documentation for your sound
card or from the sound card manufacturer.
3. Functions
Button: Function: LED display
On/Standby:
Switches the system
to standby or active
mode. The system
is not completely
disconnected from
the power supply in
this mode!
The LED lights blue or red in
active mode depending on the
chosen sound source. If the
system is put in standby mode
(LED goes out) and re-activated,
the last chosen sound source is
always active.
Input
Changes between
2 connected sound
sources (to “5.1”
and “2.1”).
Blue LED : The input of the 5.1
sound source is active (default).
Red LED
: The input of the 2.1
sound source is active.
Master (-/+):
Controls the overall
volume of the system
Depending on the selected
sound source (5.1 or 2.1), the
LED flashes blue or red when
the volume is altered.
Sub
Controls the bass
sound of the subwoo-
fer
Depending on the selected
sound source (5.1 or 2.1), the
LED flashes blue or red when
the bass is altered.
Power On/Off
(Subwoofer)
Power switch to
completely switch off
the system
After switching the system
off and then on again, 5.1 is
activated. The LED flashes blue
several times and goes out.