Page 7
Adjustments to be fulfilled by the dealer according to the end-
user’s morphology in order to obtain the
best standing position as possible.
3.1 IN SEATED POSITION.
3.1.1
– Seat depth
Possibilities of adjustment from 36 to 54 cm.
In order to obtain a good stretched standing position, it is compulsory to get first a good and comfortable
seated position. Therefore the seat depth must be adjusted to end-
user’s thigh length.
A sticker on the left side of the chair indicates the seat depth.
WARNING! Always double-check that the setting of the pivot points on the upper and lower seat tube
correspond.
TIPS! By exception, doing the opposite by making a different connection between upper and lower seat
tubes, you will get a different range of backrest adjustment going to a complete flat position if wished.
Chapiter III – ADJUSTMENTS
To proceed with the adjustment, remove the two bolts fitting the upper seat depth tube and the bolt
fitting the lower seat depth tube to the backrest. Adjust and replace the bolts in the holes
corresponding to the desired seat depth, then connect the
plates together.
As a reminder, a well-adjusted seat depth means 4 to 5cm distance between the popliteal and the
seat strap.
Caution
! Once the seat depth is adjusted, double check that the hole adjustment in the upper seat
depth tube corresponds to the one in the lower seat depth tube.
