5
English
OPERATION
ADJUSTING THE LIGHT DIRECTION
Each of the work light heads can be tilted vertically up to 30° down or 90° up.
To Adjust the Light Direction,
loosen the side locking knob (4-FIG 1). Adjust the work light head to the desired
position, and retighten the knob.
ON/OFF SWITCH
Each of the work light heads is equipped with an ON/OFF switch (5-FIG 1) located on the back side of the work light.
Press the switch once to turn the work light on and press the switch a second time to turn it off. Always turn the work
light off before unplugging.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
Use the similar care for the stand and tripod.
WARNING:
Always make sure the work light is unplugged and
completely cool before attempting to clean it.
WARRANTY
This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call
the Toll-Free Help Line for possible solutions.
HELP LINE
For questions about this or any other
PowerSmith
™ product,
Please call Toll-Free:
888-552-8665.
Or visit our website:
www.powersmithtools.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
